ColdSpray PCS-1000
Heater-Gun Integrated Cold Spray Unit
Metals difficult to be deposited such as Ni, Ti and stainless steel can be created at higher gas temperatures and pressures with high deposition efficiency. Deposits more than 10 mm thick can be achieved.
- Heater and gun integrated into one unit.
- Coatings are almost non-oxidized and remarkably dense.
- Electrical conductivity of Cu deposit is over 95% pure copper.
- Coatings can be deposited on a wide variety of substrate materials such as metals, alloys and ceramics.
- Neither nozzle clogging nor blockage occurs through a newly developed nozzle technology.
- Maximum chamber gas temperature: 1000°C
- Maximum gas pressure: 5 MPa
System Specifications
| Main unit | High gas temperature PCS-1000 | ||
|---|---|---|---|
| Gas chamber | Operating gas pressure |
~5MPa | |
| Maximum gas temperature |
~1000°C | ||
| Heater power source |
Power supply |
70kW | |
| Powder supply unit |
Container volume |
0.5. liters (std.), 2.5 liters, 15 liters | |
| Controller Gas control unit |
Operational method |
Touch panel Either N2 or He gas |
|
| Automatic gas pressure control |
Either automatic or manual controll | ||
| Automatic gas temperature control |
Automatic control | ||
Data logging function with various interlocking systems
| Utilities | High gas temperature PCS-1000 |
|---|---|
| Power source |
50/60 Hz, Three-phase, AC 400V,150A |
| 2 Lines | |
| and One-phase, AC 100V, 15A | |
| Operating gas | Primary supply at least 6 MPa (5 MPa during operation) |
| Other | Dust collector, robotics, sound booth |
